Dynojet AutoTune Kits for Power Commander V and 6
AutoTune accessories add wideband oxygen-sensor feedback to a compatible Power Commander V or 6. Select a single-channel kit or a dual-channel kit for the feedback configuration required by the installation.
- AT-200 includes one sensor and one feedback channel.
- AT-300 includes two sensors for independent feedback on twin-cylinder installations.
- A compatible Power Commander and the appropriate exhaust installation are required; the controller is sold separately.
Application details
Single sensor — single channel (AT-200)
Single-channel AutoTune accessory for compatible Power Commander V or Power Commander 6 systems. One wideband oxygen sensor measures the air/fuel ratio for fuel-map correction toward the selected target.
Manufacturer part number: AT-200
- Universal tuner accessory; requires a compatible Power Commander and a 12V power source.
- Includes one wideband oxygen sensor, CAN connection cable and an M18 × 1.5 weld-in sensor bung.
- For installations using one feedback channel. Use a dual-channel kit when independent air/fuel feedback for two cylinders is required.
Two sensors — dual channel (AT-300)
Dual-channel AutoTune accessory for compatible Power Commander V or Power Commander 6 installations. Two wideband oxygen sensors monitor the air/fuel ratio so the tuner can adjust fueling toward the selected target.
Manufacturer part number: AT-300
- Universal tuner accessory for compatible twin-cylinder installations; it is not a stand-alone ECU tuner.
- Requires a compatible Power Commander and a 12V power source.
- Includes two wideband oxygen sensors and 18mm × 1.5 weld-in sensor bungs. Verify exhaust installation requirements.