Feuling Reaper Milwaukee-Eight Chain-Drive Camshafts
Individual Reaper camshafts for non-VVT Milwaukee-Eight engines. Select the grind that matches the engine build and supporting valvetrain.
- Each option contains one camshaft. Lifters, pushrods, valve springs and installation kits are separate.
- Lift figures are shown as intake / exhaust.
- Review the per-grind spring and clearance requirements before choosing a cam.
Applications and part numbers
| Part number | Application | Included parts and details |
|---|---|---|
| 1340 | Milwaukee-Eight 2017–2026, excluding VVT models; chain drive. | 405 grind with 0.395-inch intake and 0.405-inch exhaust lift. Compatible with factory valve springs, pushrods and lifters. Manufacturer operating range: 1,700–5,700 rpm. |
| 1343 | Milwaukee-Eight 2017–2026, excluding VVT models; chain drive. | 465 grind with 0.445-inch intake and 0.465-inch exhaust lift. Compatible with factory valve springs, pushrods and lifters. Manufacturer operating range: 1,850–5,950 rpm. |
| 1350 | Milwaukee-Eight 2017–2026, excluding VVT models; chain drive. | 472 grind with 0.468-inch intake and 0.472-inch exhaust lift. Compatible with factory valve springs, pushrods and lifters. Manufacturer operating range: 1,900–5,900 rpm. |
| 1354 | Milwaukee-Eight 2017–2026, excluding VVT models; chain drive. | 487 grind with 0.478-inch intake and 0.487-inch exhaust lift. Direct replacement for Gen 1 and Gen 2 non-VVT engines; performance valve springs are optional. |
| 1346 | Milwaukee-Eight 2017–2026, excluding VVT models; chain drive. | 521 grind with 0.518-inch intake and 0.521-inch exhaust lift. High-lift valve springs are required on Gen 1 heads; performance pushrods and lifters are recommended. Manufacturer operating range: 2,250–6,250 rpm. |
| 1348 | Milwaukee-Eight 2017–2026, excluding VVT models; chain drive. | 592 grind with 0.578-inch intake and 0.592-inch exhaust lift for large-bore performance builds. High-lift, high-load valve springs plus performance pushrods and lifters are required. Check all clearances; Screamin’ Eagle camplate 25400419 may have interference with high-lift cams. |
| 1352 | Milwaukee-Eight 2017–2026, excluding VVT models; chain drive. | 618 grind with 0.608-inch intake and 0.618-inch exhaust lift. Requires a large-bore build, ported heads and intake manifold, high-flow valves and a large throttle body. High-lift, high-load valve springs plus performance pushrods and lifters are required. Check all installation clearances. Manufacturer operating range: 3,100–6,650 rpm. |
Application and emissions notes
405, 465 and 472 grinds: Feuling lists CARB exemption coverage for the applicable 2017–2023 Milwaukee-Eight models. Mechanical fitment through 2026 does not extend that exemption to later models.
487, 521, 592 and 618 grinds: Feuling designates this part for competition use only, not for vehicles registered for public-road use; not legal for sale or use on pollution-controlled vehicles in California.
Additional 508 and 538 grinds
These additional selections follow the same non-VVT direct-fit scope. Their Gen 1 spring requirements and competition-use designation are listed below. Manufacturer dyno sheets show specific modified test builds, not guaranteed results.
Applications and part numbers
| Part number | Application | Contents and requirements |
|---|---|---|
| 1349 | Milwaukee-Eight 2017–2026, excluding VVT models; chain drive. | 508 grind with 0.508-inch intake and 0.511-inch exhaust lift. Feuling identifies this cam as a Gen 2 bolt-in profile; performance pushrods and lifters are recommended. High-lift valve springs are required on Gen 1 engines. Verify high-lift spring capacity on Screamin’ Eagle heads. One camshaft only; supporting valvetrain and installation components are separate. Feuling designates this SKU for competition use only, not vehicles registered for public roads; excluded from sale or use on pollution-controlled vehicles in California. |
| 1351 | Milwaukee-Eight 2017–2026, excluding VVT models; chain drive. | 538 grind with 0.538-inch intake and 0.542-inch exhaust lift. Feuling identifies this cam as a Gen 2 bolt-in profile; performance pushrods and lifters are recommended. High-lift valve springs are required on Gen 1 engines. Verify high-lift spring capacity on Screamin’ Eagle heads. One camshaft only; supporting valvetrain and installation components are separate. Feuling designates this SKU for competition use only, not vehicles registered for public roads; excluded from sale or use on pollution-controlled vehicles in California. |