2024-Present Road Glide 2-Speaker DSP Audio System | Cicada
2024-Present Road Glide 2-Speaker DSP Audio System | Cicada
2024-Present Road Glide 2-Speaker DSP Audio System | Cicada.
Features and specifications
- Road Glide-specific component speaker system
- Cicada 24CXK65.2RG component kit
- Two 2-ohm 6.5-inch mid-bass drivers
- Two 4-ohm shallow horn tweeters
- External 12dB passive crossovers
- FLX1400.4PRO four-channel DSP amplifier
- 350 watts RMS × 4 at 2 ohms
- Six DSP channels: four amplified and two pass-through
- Bluetooth audio streaming
- USB-C computer-based DSP tuning
- DIALD app-compatible configuration
- NAV-TV ZEN-H factory A2B integration
- Cicada HDPG4K 4-AWG power kit
- One 2-ohm 6.5-inch mid-bass driver
- One 4-ohm shallow horn tweeter
- One external passive crossover
- One dedicated amplified DSP channel
- Install both passive tweeter crossovers correctly.
- Do not connect either tweeter directly to unfiltered amplifier output.
- Configure protective high-pass filtering for both front channels.
- Set gain using measured clean output rather than by ear.
- Use DSP output limiting to protect the mid-bass drivers.
- Use equalization to correct fairing-specific response issues.
- Use time alignment to improve left-to-right arrival timing.
- Confirm tweeter polarity and attenuation before final assembly.
- Reduce output immediately if distortion or mechanical noise occurs.
- Cicada Speaker and Crossover Installation
- Speaker Polarity Check
- Road Glide Fairing Removal
- Late-Model Harley T-Harness Installation
- Motorcycle Amplifier Installation Parts
- Motorcycle Audio Installation in Taylors, SC
- Request a Custom Audio Build
- Motorcycle Audio Batteries
- This product is configured for compatible Road Glide motorcycles.
- The speaker kit uses two 2-ohm mid-bass drivers.
- The speaker kit uses two 4-ohm shallow horn tweeters.
- Both passive crossover networks must be used.
- Two amplifier channels operate the front component system.
- Two amplified DSP channels remain available for expansion.
- Two additional DSP pass-through channels are available.
- Rear speakers and rear mounting components are not included.
- Verify speaker depth, grille clearance and crossover placement.
- Verify amplifier mounting space and rack compatibility.
- Correct DSP setup and output limiting are required.
- Professional installation and tuning are strongly recommended.
Fitment and installation
Resistor options allow the high-frequency output to be reduced by 3dB or 6dB when required by the installation and final tuning.
The Cicada HDPG4K supplies the heavy-gauge power and ground foundation required for the FLX1400.4PRO installation.
No. Rear speakers, rear wiring and rear mounting components must be added separately.
Yes. Proper crossover, equalization, limiting and gain configuration are essential because the amplifier has more available output than the included mid-bass drivers require.
2023 CVO Road Glide Verify the exact motorcycle, fairing, factory radio, factory amplifier and A2B configuration before ordering for a late-production CVO Road Glide. 2024-Present Road Glide The 24CXK65.2RG speaker package is designed around compatible redesigned 2024-Present Road Glide factory speaker locations.
Road Glide configuration: This system uses the Road Glide-specific 24CXK65.2RG component kit. It is not the Street Glide speaker configuration. Confirm the exact year, model and trim before ordering.
Designed around compatible late-model Road Glide locations.
Submit complete motorcycle information: Confirm the motorcycle year, exact Road Glide model, trim, factory radio, factory amplifier, A2B configuration and current audio modifications.